| shell
> cat /etc/ansible/roles/install_zabbix_agent/templates/zabbix_agentd.conf
# This is a config file for the Zabbix agent
daemon (Unix)
# To get more information about Zabbix, visit
http://www.zabbix.com
############ GENERAL PARAMETERS #################
### Option: PidFile
# Name of PID file.
#
# Mandatory: no
# Default:
# PidFile=/tmp/zabbix_agentd.pid
### Option: LogFile
# Name of log file.
# If not set, syslog is used.
#
# Mandatory: no
# Default:
# LogFile=
LogFile=/tmp/zabbix_agentd.log
### Option: LogFileSize
# Maximum size of log file in MB.
# 0 - disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default:
# LogFileSize=1
### Option: DebugLevel
# Specifies debug level
# 0 - basic information about starting and stopping
of Zabbix processes
# 1 - critical information
# 2 - error information
# 3 - warnings
# 4 - for debugging (produces lots of information)
#
# Mandatory: no
# Range: 0-4
# Default:
# DebugLevel=3
### Option: SourceIP
# Source IP address for outgoing connections.
#
# Mandatory: no
# Default:
# SourceIP=
### Option: EnableRemoteCommands
# Whether remote commands from Zabbix server
are allowed.
# 0 - not allowed
# 1 - allowed
#
# Mandatory: no
# Default:
# EnableRemoteCommands=0
### Option: LogRemoteCommands
# Enable logging of executed shell commands
as warnings.
# 0 - disabled
# 1 - enabled
#
# Mandatory: no
# Default:
# LogRemoteCommands=0
##### Passive checks related
### Option: Server
# List of comma delimited IP addresses (or hostnames)
of Zabbix servers.
# Incoming connections will be accepted only
from the hosts listed here.
# If IPv6 support is enabled then '127.0.0.1',
'::127.0.0.1', '::ffff:127.0.0.1' are treated
equally.
#
# Mandatory: no
# Default:
# Server=
Server={{ zabbix_server_ip }}
### Option: ListenPort
# Agent will listen on this port for connections
from the server.
#
# Mandatory: no
# Range: 1024-32767
# Default:
# ListenPort=10050
ListenPort={{ zabbix_port }}
### Option: ListenIP
# List of comma delimited IP addresses that
the agent should listen on.
# First IP address is sent to Zabbix server
if connecting to it to retrieve list of active
checks.
#
# Mandatory: no
# Default:
# ListenIP=0.0.0.0
### Option: StartAgents
# Number of pre-forked instances of zabbix_agentd
that process passive checks.
# If set to 0, disables passive checks and the
agent will not listen on any TCP port.
#
# Mandatory: no
# Range: 0-100
# Default:
# StartAgents=3
##### Active checks related
### Option: ServerActive
# List of comma delimited IP:port (or hostname:port)
pairs of Zabbix servers for active checks.
# If port is not specified, default port is
used.
# IPv6 addresses must be enclosed in square
brackets if port for that host is specified.
# If port is not specified, square brackets
for IPv6 addresses are optional.
# If this parameter is not specified, active
checks are disabled.
# Example: ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1]
#
# Mandatory: no
# Default:
# ServerActive=
#ServerActive=127.0.0.1:10051
### Option: Hostname
# Unique, case sensitive hostname.
# Required for active checks and must match
hostname as configured on the server.
# Value is acquired from HostnameItem if undefined.
#
# Mandatory: no
# Default:
# Hostname=
Hostname={{ ansible_all_ipv4_addresses[1] }}
### Option: HostnameItem
# Item used for generating Hostname if it is
undefined. Ignored if Hostname is defined.
# Does not support UserParameters or aliases.
#
# Mandatory: no
# Default:
# HostnameItem=system.hostname
### Option: HostMetadata
# Optional parameter that defines host metadata.
# Host metadata is used at host auto-registration
process.
# An agent will issue an error and not start
if the value is over limit of 255 characters.
# If not defined, value will be acquired from
HostMetadataItem.
#
# Mandatory: no
# Range: 0-255 characters
# Default:
# HostMetadata=
### Option: HostMetadataItem
# Optional parameter that defines an item used
for getting host metadata.
# Host metadata is used at host auto-registration
process.
# During an auto-registration request an agent
will log a warning message if
# the value returned by specified item is over
limit of 255 characters.
# This option is only used when HostMetadata
is not defined.
#
# Mandatory: no
# Default:
# HostMetadataItem=
### Option: RefreshActiveChecks
# How often list of active checks is refreshed,
in seconds.
#
# Mandatory: no
# Range: 60-3600
# Default:
# RefreshActiveChecks=120
### Option: BufferSend
# Do not keep data longer than N seconds in
buffer.
#
# Mandatory: no
# Range: 1-3600
# Default:
# BufferSend=5
### Option: BufferSize
# Maximum number of values in a memory buffer.
The agent will send
# all collected data to Zabbix Server or Proxy
if the buffer is full.
#
# Mandatory: no
# Range: 2-65535
# Default:
# BufferSize=100
### Option: MaxLinesPerSecond
# Maximum number of new lines the agent will
send per second to Zabbix Server
# or Proxy processing 'log' and 'logrt' active
checks.
# The provided value will be overridden by the
parameter 'maxlines',
# provided in 'log' or 'logrt' item keys.
#
# Mandatory: no
# Range: 1-1000
# Default:
# MaxLinesPerSecond=100
############ ADVANCED PARAMETERS #################
### Option: Alias
# Sets an alias for an item key. It can be used
to substitute long and complex item key with
a smaller and simpler one.
# Multiple Alias parameters may be present.
Multiple parameters with the same Alias key
are not allowed.
# Different Alias keys may reference the same
item key.
# For example, to retrieve the ID of user 'zabbix':
# Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,^zabbix:.:([0-9]+),,,,\1]
# Now shorthand key zabbix.userid may be used
to retrieve data.
# Aliases can be used in HostMetadataItem but
not in HostnameItem parameters.
#
# Mandatory: no
# Range:
# Default:
### Option: Timeout
# Spend no more than Timeout seconds on processing
#
# Mandatory: no
# Range: 1-30
# Default:
Timeout=20
### Option: AllowRoot
# Allow the agent to run as 'root'. If disabled
and the agent is started by 'root', the agent
# will try to switch to the user specified by
the User configuration option instead.
# Has no effect if started under a regular user.
# 0 - do not allow
# 1 - allow
#
# Mandatory: no
# Default:
# AllowRoot=0
### Option: User
# Drop privileges to a specific, existing user
on the system.
# Only has effect if run as 'root' and AllowRoot
is disabled.
#
# Mandatory: no
# Default:
# User=zabbix
### Option: Include
# You may include individual files or all files
in a directory in the configuration file.
# Installing Zabbix will create include directory
in /usr/local/etc, unless modified during the
compile time.
#
# Mandatory: no
# Default:
# Include=
# Include=/usr/local/etc/zabbix_agentd.userparams.conf
# Include=/usr/local/etc/zabbix_agentd.conf.d/
# Include=/usr/local/etc/zabbix_agentd.conf.d/*.conf
####### USER-DEFINED MONITORED PARAMETERS #######
### Option: UnsafeUserParameters
# Allow all characters to be passed in arguments
to user-defined parameters.
# 0 - do not allow
# 1 - allow
#
# Mandatory: no
# Range: 0-1
# Default:
UnsafeUserParameters=1
### Option: UserParameter
# User-defined parameter to monitor. There can
be several user-defined parameters.
# Format: UserParameter=<key>,<shell
command>
# See 'zabbix_agentd' directory for examples.
#
# Mandatory: no
# Default:
# UserParameter=
####### LOADABLE MODULES #######
### Option: LoadModulePath
# Full path to location of agent modules.
# Default depends on compilation options.
#
# Mandatory: no
# Default:
# LoadModulePath=${libdir}/modules
### Option: LoadModule
# Module to load at agent startup. Modules are
used to extend functionality of the agent.
# Format: LoadModule=<module.so>
# The modules must be located in directory specified
by LoadModulePath.
# It is allowed to include multiple LoadModule
parameters.
#
# Mandatory: no
# Default:
# LoadModule= |
